A 4-burner gas grill on a cart, steps 1 to 16 of its manual.

What happens in the video

1. 0:00 Parts The cart panels, firebox, doors and castors; 37 screws and caps from the bag, in 8 kinds; 4 AA cells
2. 0:15 Step 1 Side panels hooked onto the rear panel's 4 fitted screws, then tightened · #3 square driver
3. 0:22 Step 2 The three panels turned over; the base lowered on · no hardware
4. 0:29 Step 3 Castor brackets and base trim joined on top of the carton · 2× #8 × 1/2 in screw
5. 0:36 Step 4 That frame set on the upside-down cart · 8× #14 × 3/4 in hex screw
6. 0:43 Step 5 Firebox upside down on the carton; grease rails and bale · 4× #8 × 1/2 in pointed screw, 1× #10-24 × 3/4 in screw
7. 0:53 Step 6 The cart lowered onto the firebox; the match-light stick hung · 2× 1/4-20 × 3/4 in screw
8. 1:01 Step 7 Hose bracket inside the side panel · 2× #10-24 × 3/8 in screw
9. 1:06 Step 8 Battery pack, 3 AA cells and its cap · 2× #8 × 1/2 in screw
10. 1:16 Step 9 Electronic ignitor wired to the burner electrodes, 1 AA cell · no bag hardware
11. 1:23 Step 10 Magnet on the base · 2× #8 × 1/2 in screw
12. 1:30 Step 11 Cabinet bracket between the doors · 2× 1/4-20 × 3/4 in screw
13. 1:36 Step 12 Tank brackets, outside and inside · 1× 1/4-20 × 5/8 in screw, 1× 1/4-20 nut (they come fitted, not in the bag)
14. 1:45 Step 13 Handles onto both doors, screwed from inside · 4× #14 × 3/8 in hex screw (they come fitted, not in the bag)
15. 1:51 Step 14 Doors hung on their pins · 2× 1/4-20 × 1 in shoulder screw
16. 2:00 Step 15 Castors pushed in, caps on · 4× castor cap
17. 2:09 Step 16 The grill turned upright onto its castors, the firebox fixed to the cart · 6× 1/4-20 × 3/4 in screw
18. 2:17 Done Upright on its castors, firebox on the cart, doors hung. The manual's steps 17 to 25 aren't in this sample.